 |
High Port 'C' Bit
The high port mouth gives full contact across the palate and
works well for hard charging horses. The port base allows some
tongue relief. The low leverage shanks are turned back to
increase signal with less weight. The rein loops are large for
lighter contact. Sweet iron keeps the mouth wet and responsive.
Shanks: 6", Stainless steel 'C' shanks.
Mouth: 5", "Sweet-iron" High port mouth. (AC 55289) - $29.90
(Normally ships in 2-5 days)
|
 |
High Port Bit
The high port mouth gives full contact across the palate and
works well for hard charging horses. The short low-leverage
shanks are turned back to allow grazing and provide added
signal. Hand engraved brass trim adds to the overall appearance
of this bit. The wide 5-1/2" mouth works well on larger breeds.
Shanks: 6-1/4", Stainless steel shanks with hand engraved brass
trim.
Mouth: 5-1/2", Stainless steel high port. (AC 15529-4) - $25.90
(Normally ships in 2-5 days)
|
 |
High Port Aluminum
Bit
The high port is not only a good everyday working bit, it is
good for horses with tongue damage applying pressure to the
palate and bars. The long aluminum shanks are lightweight and
turned back for added signal. The "Sweet-iron" mouth with copper
bars keeps the mouth wet and responsive.
Shanks: 8", Aluminum.
Mouth: 5", "Sweet-iron" medium port with copper bars. (AC 16111) - $39.90
(Normally ships in 2-5 days)
|
 |
Whoa Port Bit
The wide high "Whoa port" mouth applies pressure to the palate
in a new area. This bit is a good tool for hard charging horses
or the "old warhorse" and for horses with a mouth or tongue
injury. The long curved shanks provide good leverage and are
turned back to increase signal. The rein loops are large for
more signal and a lighter rein. The dropped curb loops place the
curb in a different position for a new feel.
Shanks: 9", Chromed steel curved shanks.
Mouth: 5", Chromed steel "Whoa port". (AC 15701) - $35.90
(Normally ships in 2-5 days)
|
 |
High Port Colt Bit
The high port is not only a good everyday working bit, it is
also a gentle bit effective tool when you need to advance the
horse's ability to give his chin and frame his body. The shanks
are a little longer than the Tom Thumb and slightly turned back
for more signal. Brass bushings create a smooth pinchless joint.
"Sweet-iron" keeps the mouth wet and responsive.
Shanks: 8", Stainless steel.
Mouth: 5", "Sweet-iron" high port with copper bars. (AC 15207-3) - $39.90
(Normally ships in 2-5 days)
|
 |
High Port Colt Bit
The high port is not only a good everyday working bit, it is
also a gentle bit effective tool when you need to advance the
horse's ability to give his chin and frame his body. The shanks
are a little longer than the Tom Thumb and slightly turned back
for more signal. Brass bushings create a smooth pinchless joint.
"Sweet-iron" keeps the mouth wet and responsive
Shanks: 6", Stainless steel.
Mouth: 5", "Sweet-iron" high port with copper bars. (AC 15205-3) - $39.90
(Normally ships in 2-5 days)
|
 |
High Port California
Shank
West Coast style cheeks feature a high cheek to shank ratio that
reduces signal and demands an immediate response. The high port
mouth applies pressure to the palate and bars--a good tool for
horses with tongue damage. Hand engraved Silver overlay adds a
professional look. "Sweet-iron" with copper bars keeps the mouth
wet and responsive.
Shanks: 8", Stainless steel heart shaped.
Mouth: 5", "Sweet-iron" high port with copper bars.
Trim: Hand engraved Silver overlay. (AC 15427-9) - $85.90
(Normally ships in 2-5 days)
|
 |
High Port California
Shank
West Coast style cheeks feature a high cheek to shank ratio that
reduces signal and demands an immediate response. The high port
mouth applies pressure to the palate and bars--a good tool for
horses with tongue damage. Hand engraved Silver overlay adds a
professional look. "Sweet-iron" with copper bars keeps the mouth
wet and responsive.
Shanks: 8", Stainless steel heart shaped.
Mouth: 5", "Sweet-iron" high port with copper bars.
Trim: Hand engraved Silver overlay. (AC 15424-9) - $79.90
(Normally ships in 2-5 days)
|
 |
High Port Colt Bit
The high port is not only a good everyday working bit, it is
also a gentle bit effective tool when you need to advance the
horse's ability to give his chin and frame his body. The shanks
are a little longer than the Tom Thumb and slightly turned back
for more signal. Brass bushings create a smooth pinchless joint.
"Sweet-iron" with copper bars keeps the mouth wet and
responsive.
Shanks: 7", Stainless steel.
Mouth: 5", "Sweet-iron" high port with copper bars.
Trim: Hand engraved Silver overlay. (AC 15402-31) - $41.90
(Normally ships in 2-5 days)
|
 |
High Port Colt Bit
The spooned high port is not only a good everyday working bit,
it is also a gentle bit effective tool when you need to advance
the horse's ability to give his chin and frame his body. The
shanks are a little longer than the Tom Thumb and slightly
turned back for more signal. Brass bushings create a smooth
pinchless joint. Hand engraved Silver overlay adds a
professional touch.
Shanks: 7", Antique brown steel.
Mouth: 5", "Sweet-iron" high port with copper bars.
Trim: Hand engraved Silver overlay. (AC 15407-31) - $41.90
(Normally ships in 2-5 days)
|
 |
High Port Colt Bit
The high port is not only a good everyday working bit, it is
also a gentle bit effective tool when you need to advance the
horse's ability to give his chin and frame his body. The shanks
are a little longer than the Tom Thumb and slightly turned back
for more signal. Brass bushings create a smooth pinchless joint.
Hand engraved Silver overlay adds a professional touch.
Shanks: 7", Blued steel.
Mouth: 5", "Sweet-iron" high port with copper bars.
Trim: Hand engraved Silver overlay. (AC 15405-31) - $39.90
(Normally ships in 2-5 days)
|
 |
Silver High Port Bit
The high port is not only a good everyday working bit, it is
also a gentle bit effective tool when you need to advance the
horse's ability to give his chin and frame his body. The shanks
are a little longer than the Tom Thumb and turned back for more
signal. Hand engraved Silver overlay adds a professional touch.
Shanks: 8", Stainless steel.
Mouth: 5", "Sweet-iron" high port with copper bars.
Trim: Hand engraved Silver overlay. (AC 15474-5) - $49.90
(Normally ships in 2-5 days)
|
 |
High Port Show Bit
The high port is not only a good everyday working bit, it is
also a gentle bit effective tool when you need to advance the
horse's ability to give his chin and frame his body. The shanks
are long and curved with loose rein rings for more leverage and
signal. Hand engraved Silver overlay adds a professional touch.
Shanks: 7-1/4", Blued steel Cavalry shank,
Mouth: 5", "Sweet-iron" high port.
Trim: Hand engraved Silver overlay. (AC 15460-9) - $37.90
(Normally ships in 2-5 days)
|
 |
High Port Show Bit
The spooned high port is not only a good everyday working bit,
it is also a gentle bit effective tool when you need to advance
the horse's ability to give his chin and frame his body. The
long Cavalry style shanks work well with older, more experienced
horses. "Sweet-iron" keeps the mouth wet and responsive. Hand
engraved Silver overlay adds the professional look.
Shanks: 8-1/4", Stainless steel.
Mouth: 5", "Sweet-iron" spooned high port with copper bars.
Trim: Hand engraved Silver overlay. (AC 15421) - $55.90
(Normally ships in 2-5 days)
|
 |
High Port California
Shank
West Coast style cheeks feature a high cheek to shank ratio that
reduces signal and demands an immediate response. The spooned
high port mouth applies pressure to the palate, bars and tongue.
Hand engraved Silver overlay adds a professional look.
"Sweet-iron" with copper bars keeps the mouth wet and
responsive.
Shanks: 8", Stainless steel circle shaped.
Mouth: 5", "Sweet-iron" spooned high port with copper bars.
Trim: Hand engraved Silver overlay. (AC 15427) - $85.90
(Normally ships in 2-5 days)
|
 |
High Port Colt Bit
The spooned high port is not only a good everyday working bit,
it is also a gentle bit effective tool when you need to advance
the horse's ability to give his chin and frame his body, The
shanks are a little longer than the Tom Thumb and slightly
turned back for more signal. Brass bushings create a smooth
pinchless joint. "Sweet-iron" with copper bars keeps the mouth
wet and responsive.
Shanks: 7", Stainless steel.
Mouth: 5", "Sweet-iron" high port with copper bars. (AC 15402-2) - $41.90
(Normally ships in 2-5 days)
|
 |
High Port Colt Bit
The spooned high port is not only a good everyday working bit,
it is also a gentle bit effective tool when you need to advance
the horse's ability to give his chin and frame his body. The
shanks are a little longer than the Tom Thumb and slightly
turned back for more signal. Brass bushings create a smooth
pinchless joint. Sweet-iron" keeps the mouth wet and responsive.
Shanks: 8", Stainless steel.
Mouth: 5", "Sweet-iron" spooned high port with copper bars. (AC 15207-2) - $39.90
(Normally ships in 2-5 days)
|
 |
High Port Tom Thumb
The spooned high port is not only a good everyday working bit,
it is also a gentle bit effective tool when you need to advance
the horse's ability to give his chin and frame his body. The
short low-leverage shanks are gentle and turned back for more
signal. Brass bushings create a smooth pinchless joint.
"Sweet-iron" keeps the mouth wet and responsive.
Shanks: 6", Stainless steel.
Mouth: 5", "Sweet-iron" spooned high port with copper bars. (AC 15205-2) - $39.90
(Normally ships in 2-5 days)
|
 |
High Port Tom Thumb
The spooned high port is not only a good everyday working bit,
it is also a gentle bit effective tool when you need to advance
the horse's ability to give his chin and frame his body. The
short low-leverage shanks are gentle and turned back for more
signal. "Sweet-iron" keeps the mouth wet and responsive.
Shanks: 6-1/2", Stainless steel.
Mouth: 5", "Sweet-iron" spooned high port.
(AC 15687-4) - $41.90
(Normally ships in 2-5 days)
|
