 |
Mike Beers Gag
3/8 Medium Port Sweet Iron
7" Cheek 5" Mouth
If you have a horse fighting the bit or shaking his head this solid
mouthpiece will work wonders with him. The smaller diameter adds a little bite
to your control. This bit helps to stabilize and lift the front end for horses
over flexing or dropping one shoulder.
(REP 545) -$ 74.86
(Normally ships in 10-14 days)
|
 |
Large Chain Mouth Bit
6" CHEEKS 5" MOUTH
A lot more than good looks. Starting with a unique no-pinch headstall ring.
Excellent balance for better feel. Medium leverage (tight curb) to low leverage
(loose curb). Can be used from the later training stage, showing, pleasure, on
thru some serious competition. A very comfortable mouth for a horse and easy to
pack. Applies tongue pressure for head set. Will help to lift front shoulders
and get the rear end down.
(REP 552) -$ 60.42
(Normally ships in 10-14 days)
|
 |
6” Mike Beers Classic
Large Chain Mouth Bit
6” CHEEK 5" MOUTH
This bit has that classic look. It has a no pinch headstall ring and
excellent balance. Medium leverage with a tight curb to low leverage with a
loose curb. Can be used from the later training stage, showing, pleasure or
serious competition. The mouthpiece is comfortable for a horse and easy to pack,
It applies tongue pressure for headset and helps to lift the front shoulders and
get the rear end down
(REP 553) -$ 53.20
(Normally ships in 10-14 days)
|
 |
Ported Chain Mouth Bit
6" CHEEKS 5" MOUTH
Features a unique no pinch headstall ring. Excellent balance. Medium leverage
(light curb) to low leverage (loose curb). Excellent for later training,
showing, pleasure and on thru competition. Mouthpiece uses tongue pressure for a
different cue and adds more bar pressure than a straight chain for harder
mouthed horses. Port height is 1 1/4"
(REP 554) -$ 64.41
(Normally ships in 10-14 days)
|
 |
Mike Beers
6” Wide Port Chain Mouth Bit
6" CHEEK 5" MOUTH
Great looks, excellent balance and a no pinch curb. This bit has medium
leverage. The mouthpiece adds lots of tongue relief and slight palate pressure
to cue a horse to stop. This mouth/shank combination works well on horses with a
good mouth and natural rate.
(REP 556) -$ 64.98
(Normally ships in 10-14 days)
|
 |
Mike Beers Pro Heeler Bit
7” CHEEK 5” MOUTH
This bit excels in the lateral control needed for heeling steers. It also
maintains good vertical control needed to stop or back your horse. Port height
is 1 3/4"
(REP 865) -$ 125.21
(Normally ships in 10-14 days)
|
 |
Mike Beers Pro Header Bit
8 1/2" CHEEK 5” mouth
This bit excels in the vertical control needed to stop or back your horse
while maintaining the lateral control needed to head a steer. Port height is 1
3/4".
(REP 868) -$ 144.59
(Normally ships in 10-14 days)
|
