 |
DM Shank
1/2" Sweet Iron Single Ball Snaffle
7" CHEEKS 5"MOUTH
This bit is more than attractive. It is a well balanced, medium leverage
shank. The extended curb rings adds to the curb action for a faster set and more
control. This totally new design for connecting a snaffle mouthpiece not only
eliminates the possibility of pinching a horses tongue it totally frees the
action between the left and right shank. This allows you to train or school your
horse without movement from the off side.
(REP 603) - $ 98.64
(Normally ships in 10-14 days)
|
 |
DM Shank
1/2" Sweet Iron Double Ball Snaffle
7" CHEEKS 5"MOUTH
This is a well balanced, medium leverage shank. The extended curb rings adds
to the curb action for a faster set and more control. This totally new design
for connecting a three piece snaffle mouthpiece eliminates the possibility of
pinching a horses tongue. The center section adds tongue pressure for better
headset. The ball joints totally frees the action between the left and right
shank. This allows you to train or school your horse without movement from the
off side.
(REP 604) - $ 107.91
(Normally ships in 10-14 days)
|
 |
DM Shank
Small Sweet Iron Chain Mouth
7" CHEEKS 5"MOUTH
This bit is more than attractive. It is a well balanced, medium leverage
shank. The extended curb rings adds to the curb action for a faster set and more
control. The small chain mouth will surprise you. It is actually very forgiving.
It conforms to the mouth very well and adds some tongue pressure for better
control. This is an excellent choice if you like a heavier feel in your hand.
(REP 605) - $ 78.12
(Normally ships in 10-14 days)
|
 |
DM Shank
3/8" 3-Piece Thumb Port With Roller
7" CHEEKS 5"MOUTH
This bit is more than attractive. It is a well balanced, medium leverage
shank. The extended curb rings adds to the curb action for a faster set and more
control. This mouthpiece has a lot going on. First when you pull on the rein the
thumb portion rotates to cue your horse. The smaller diameter bars and the three
piece action gives this mouth a lot of whoa. The roller helps to pacify a
nervous horse.
(REP 606) - $ 87.30
(Normally ships in 10-14 days)
|
 |
DM Shank
5/8" Copper Roller Correction
7" CHEEKS 5"MOUTH
This bit is more than attractive. It is a well balanced, medium leverage
shank. The extended curb rings adds to the curb action for a faster set and more
control. This mouth is designed to be gentle and yet keep control. As the
mouthpiece rotates it gives your horse a cue and offers some tongue relief. The
rollers roll up the bars instead of sliding. When the curb sets the three piece
action it still has good control.
(REP 607) - $ 99.36
(Normally ships in 10-14 days)
|
 |
DM Shank
3/8" Spiral Ribbon Snaffle
7" CHEEKS 5"MOUTH
This bit is more than attractive. It is a well balanced, medium leverage
shank. The extended curb rings adds to the curb action for a faster set and more
control. This mouthpiece is designed for schooling a horse to back off the bit.
(REP 608) - $ 81.36
(Normally ships in 10-14 days)
|
 |
DM Dexter Bit
1/2" Sweet Iron Single Ball Snaffle
8-1/2" CHEEKS 5"MOUTH
Made with 8-1/2" long shank for good leverage. Lowered the mouthpiece to
length the purchase for faster response and to prevent the mouthpiece from
pinching the horses lip. Then finished it off with the proper bends for good
balance. This totally new design for connecting a snaffle not only eliminates
the possibility for pinching a horses tongue. It totally frees the action
between the left and right shank for easier lateral training.
(REP 803) - $ 98.64
(Normally ships in 10-14 days)
|
 |
DM Dexter Bit
1/2" Sweet Iron Double Ball Snaffle
8-1/2" CHEEKS 5"MOUTH
Made with 8-1/2" long shank for good leverage. Lowered the mouthpiece to
length the purchase for faster response and to prevent the mouthpiece from
pinching the horses lip. Then finished it off with the proper bends for good
balance. This totally new design for connecting the three piece snaffle
eliminates the possibility for pinching a horses tongue. It totally frees the
action between the left and right shank for easier lateral training.
(REP 804) - $ 107.82
(Normally ships in 10-14 days)
|
 |
DM Dexter Bit
Small Sweet Iron Chain Mouth
8-1/2" CHEEKS 5"MOUTH
Made with 8-1/2" long shank for good leverage. Lowered the mouthpiece to
length the purchase for faster response and to prevent the mouthpiece from
pinching the horses lip. Then finished it off with the proper bends for good
balance. The chain mouth is actually very forgiving. It conforms well to the
horses mouth and adds some tongue pressure for better control.
(REP 805) - $ 78.12
(Normally ships in 10-14 days)
|
 |
DM Dexter Bit
3/8" 3-Piece Thumb Port With Roller
8-1/2" CHEEKS 5"MOUTH
Made with 8-1/2" long shank for good leverage. Lowered the mouthpiece to
length the purchase for faster response and to prevent the mouthpiece from
pinching the horses lip. Then finished it off with the proper bends for good
balance. This mouthpiece has a lot going on. First your horse will feel the
thumb start to rotate, then the thumb and roller apply some tongue pressure.
When the curb sets the outside bars it adds a lot of whoa.
(REP 806) - $ 87.30
(Normally ships in 10-14 days)
|
 |
DM Dexter Bit
5/8" Copper Roller Correction
8-1/2" CHEEKS 5"MOUTH
Made with 8-1/2" long shank for good leverage. Lowered the mouthpiece to
length the purchase for faster response and to prevent the mouthpiece from
pinching the horses lip. Then finished it off with the proper bends for good
balance. As the mouthpiece rotates it gives your horse a cue. Then offers some
tongue relief. The roller bars roll up the bars instead of sliding. But, when
the curb sets the three piece action it still has good control.
(REP 807) - $ 99.36
(Normally ships in 10-14 days)
|
 |
DM Dexter Bit
3/8" Spiral Ribbon Snaffle
8-1/2" CHEEKS 5"MOUTH
Made with 8-1 /2" long shank for good leverage. Lowered the mouthpiece to
length the purchase for faster response and to prevent the mouthpiece from
pinching the horses lip. Then finished it off with the proper bends for good
balance. This mouthpiece is designed for schooling a horse to back off the bit.
(REP 808) - $ 81.36
(Normally ships in 10-14 days)
|
